Microsoft word - concresive 1488 part b_msds_150610.doc

MATERIAL SAFETY DATA SHEET

1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER

Product name: CONCRESIVE® 1488 PART B
Company:
Emergency telephone numbers: +65 6861 6766 2. HAZARDS IDENTIFICATION

Vapour is severe eye irritant. Liquid can cause severe or permanent eye damage.
Skin irritant, may cause sensitisation in some individuals. Ingestion can cause irritation, nausea vomiting and diarrhoea. Inhalation can cause severe irritation. 3. COMPOSITION / INFORMATION ON INGREDIENTS

4. FIRST AID MEASURES

Immediate treatment
While eyes are held open gently flush with water for 30 minutes. Seek immediate medical attention. Remove all contaminated clothing and shoes. Wash skin thoroughly with soap and water. Avoid solvents. Seek medical advice if irritation persists. Remove to fresh air. Supply oxygen and / or artificial respiration as needed. Seek medical assistance as needed particularly in case of allergic response. Do not induce vomiting. Contact doctor immediately. Rinse mouth and give water. Treat symptomatically. Contact Poisons Information Centre as needed. Allergic response as dermatitis or asthma-like symptoms / wheezing may occur after a single significant exposure and sensitisation may occur after single or multiple minor exposures, depending on the individual. CONCRESIVE 1488 PART B
Page 1 of 5
Revision No: 2 on 15 Jun 2010

Printed on 15/06/2010
MATERIAL SAFETY DATA SHEET
5. FIRE FIGHTING MEASURES

In case of fire oxides of carbon, nitrogen and other toxic gases are formed. Fire fighters should wear self-contained breathing apparatus in enclosed areas. Water spray, foam, carbon dioxide, dry powder. 6. ACCIDENTAL RELEASE MEASURES

Wear appropriate personal protection and ensure adequate ventilation. Prevent discharge into drains, sewers and waterways. Absorb in inert dry material. Do not sweep up or wash down with water. 7. HANDLING AND STORAGE

Keep containers tightly closed when not in use. 8. EXPOSURE CONTROLS / PERSONAL PROTECTION

Use mechanical mixing equipment and provide long handled brush for washing tools. Use only in well ventilated areas. Personal protection
Use respiratory equipment in accordance to local safety requirements. Wear safety glasses, which comply with local standards. Wear gloves or suitable protective creams. Wear overalls or other suitable protective clothing. 9. PHYSICAL AND CHEMICAL PROPERTIES
CONCRESIVE 1488 PART B
Page 2 of 5
Revision No: 2 on 15 Jun 2010

Printed on 15/06/2010
MATERIAL SAFETY DATA SHEET
10. STABILITY AND REACTIVITY

Stable under normal storage and usage temperatures. Hazardous decomposition products: None under normal storage and use temperatures. 11. TOXICOLOGICAL INFORMATION

Acute toxicity (lethal dose)
LD50 oral Albino rat
LC50 inhalation Albino rat
Acute toxicity (irritation, sensitization etc.)
Eye irritation Albino rabbit
Skin irritation Albino rabbit
Delayed or chronic toxicological effects
CONCRESIVE 1488 PART B
Page 3 of 5
Revision No: 2 on 15 Jun 2010

Printed on 15/06/2010
MATERIAL SAFETY DATA SHEET

12. ECOLOGICAL INFORMATION

Ecotoxicity
Additional information
Do not allow to be absorbed into soil. Prevent discharge into drains and waterways. Biochemical oxygen demand
13. DISPOSAL CONSIDERATIONS

Dispose in accordance with all local and governmental regulations. Set resin and hardener can be disposed to landfill. 14. TRANSPORT INFORMATION

Road transport ADR / RID
Maritime / Air transport IMDG
CONCRESIVE 1488 PART B
Page 4 of 5
Revision No: 2 on 15 Jun 2010

Printed on 15/06/2010
MATERIAL SAFETY DATA SHEET
15. REGULATORY INFORMATION
National regulatory information:
Other regulations, restrictions and prohibitions:
16. OTHER INFORMATION

Concresive 1488 Part B is part of a two-component epoxy resin system. Fully cured epoxy resin compositions, comprising mixed Part A and Part B, are considered non-toxic, non-irritant and non-sensitizing to the skin. Contact with the individual components during mixing and application should be minimised. Reason for Issue: Review and update. This MSDS summarises our best knowledge of the health and safety hazard information of the product and how to safely handle and use the product in the workplace. Each user should read this MSDS and consider the information in the context of how the product will be handled and used in the workplace including in conjunction with other products. If clarification or further information is needed to ensure that an appropriate risk assessment can be made, the user should contact this company. Our responsibility for products sold is subject to our standard terms and conditions, a copy of which is sent to our customers and is also available on request. All information contained in this MSDS is as accurate and up-to-date as possible. No warranty expressed or implied is made as to its accuracy, reliability or completeness. CONCRESIVE 1488 PART B
Page 5 of 5
Revision No: 2 on 15 Jun 2010

Printed on 15/06/2010

Source: http://www.basf-cc.com.sg/en/products/ConcreteRepairandProtectionSystems/Concresive/Concresive1488/Documents/CONCRESIVE%201488%20Part%20B_MSDS_ASEAN_150610.pdf