Gunter Stier, Heidelberg: E.coli expression, CPEP-09, KBC Umeå Miniexpression screen Part 1: Fast transformation Ready circular plasmids can be transformed much faster than ligations, especially in the high competent [Inoue, et al.] cells. Transformation efficiency drops, but still good enough. Plating on sectors saves a lot of plates and is good enough for screening. BL21 (DE3)
- A |
J |K |
U |V |
Material safety data sheetMATERIAL SAFETY DATA SHEET
Manufactured by: Imperial Western Products
P.O. Box 1765
Indio, CA 92202
Phone: 760/398-0815 Fax: 760/398-3515
General Product Name: ENFORCE TIRE MOUNTING LUBE TC-75
Synonyms: Tire Mounting Lube
Product Description: Moly lithium Based Lubricant
Composition/ Information on ingredients
This products ingredient is generally recognized as Non- Hazardous non-toxic, & Non- Restricted Octadecanoic acid 12-hydroxy-mono lithium salt. CAS# 7620-77-1. Other than the ingredients listed above, this product contains no other ingredients known to be hazardous as defined in OSHA 29 CFR 1910.1200. The National Fire Protection Association List of Hazardous Substances and the California General Industry Safety Order 5194 Hazardous identification
Potential Health Effects:
Fumes from this product are generally considered non –toxic, but can cause slight irritation to the mouth, esophagus, and lungs. There are no known acute or chronic effects EYE CONTACT: Contact of this product upon the eyes can cause irritation of the eyes and eyelids. There are SKIN CONTACT: Contact of this product upon the skin can cause irritation. Repeated or prolonged contact INGESTION:
Seek medical attention!
FIRST AID MEASURES
EYES: Flush eyes with cool water for 30 minutes. Consult a physician if irritation or damage occursSKIN: Flush exposed area with lukewarm water. Consult physician if irritation or damage occurs.
INHALATION: Fumes from this product are generally considered harmless. INGESTION: Due not induce vomiting. Have patient drink large amounts of water or milk and consult a physician immediately.
FIRE FIGHTING MEASURES
Flash Point: None Flammability Limits: None known DRY FOAM, CARBON DIOXIDE OR DRY CHEMICAL SPECIAL FIREFIGHTING PROCEDURES: THIS PRODUCT WILL NOT BURN OR SUPPORT COMBUSTION.
UNUSUAL FIRE AND EXPLOSION HAZARDS: NONE
ACCIDENTAL RELEASE MEASURES/SPILL CLEAN UP PROCEDURES
Small spill: Flush area with water to an industrial sewer line
Large spill: Contains spill with dikes of absorbent materials such as clay, sand, or
vermiculate. This material is non-hazardous and may be disposed of as non-hazardous
HANDLING AND STORAGE: For maximum results, store in closed containers
above 32°F and below 115 °F. Store out of sun and away from direct heat\cold source for prolonged periods of time for maximum usage.
EXPOSURE CONTROL/ PERSONAL PROTECTION
RESPIRATORY PROTECTION: Please use in a ventilated room, No respiratory protection is recommended. PROTECTIVE CLOTHING: Gloves are not necessary when handling this product. Simply rinse exposed area with water.
OTHER PROTECTIVE MEASURES: When handling this or any other chemical product and there is the possibility of splashing it is recommended that proper protection for the eyes be worn. This consists of chemical resistant glasses and /or goggles.
PHYSICAL AND CHEMICAL PROPERTIES
Appearance and odor: Black grease like material with petroleum odor
STABILITY AND REACTIVITY
GENERAL: Under normal conditions hazardous polymerization will not occur.
INCOMPATIBLE MATERIALS AND CONCITIONS TO AVOID: Heat or direct sunlight. Stratification of product may result if product is subjected to high temperatures. Keep away from strong oxidizing agents. HAZARDOUS DECOMPOSITION PRODUCTS: NONECombustion elements: carbon monoxide, carbon dioxide along with thick smoke DISPOSAL CONSIDERATIONS
All hazardous materials must be solidified and disposed of in and EPA approved class one facility. When disposing of chemicals, contact local, state, and federal environmental agencies to fully understand the necessary regulations governing the disposal of chemical wastes.
NMFCPROPER SHIPPING NAME: Moly greaseIDENTIFICATION NUMBER: SHIPPING CLASSIFICATION: 55Dot: Unregulated REGULATORY INFORMATION:
This product is not hazardous under the criteria of the Federal OSHA Hazard Communication Standard 29 CFR 1910.1200. However, thermal processing and decomposition fumes from this product may be hazardous noted in sections 2 and 3.
TSCA STATUS This product is listed on TSCACERCLA (Comprehensive Responsible Compensation and Liability act) NOT ReportableSARA TITLE 111 (Superfund Amendments and Reauthorization act): Section 312 extremely hazardous substances: None Section 311/312 Hazard Categories: Non hazardous Section 313 Toxic Chemicals If discarded in its purchased form, this product would not be a hazardous waste either by listing or by characteristic. However, under RCRA, its is the responsibility of the product user to determine ate the time of disposal, whether a material containing the product or derived from the product should be classified as a hazardous waste.(40 CFR 261.20-24) The following statement is made on order to comply with the California Safe Drinking water and Toxic Enforcement Act of 1986. This product contains chemicals known to the state of California to cause cancer.
This information relates only to the specific material designated and may not be valid for such material used in combination with any other materials or in any other process. Such information is to the best of the company’s knowledge and believed accurate and reliable as of the date indicated. However, no representation, warranty or guarantee of any kind, express or implied, is made as to its accuracy, reliability or completeness and we assume no responsibility for any loss, damage or expense, direct or consequential, arising out of use. It is the user’s responsibility to satisfy himself as to the suitableness and completeness of such information for his own particular use.
combi-screen® PLUS Nitrite: - Intended to identify nitrite in urine. Nitrite identifi cation is used in the diagnosis and treatment of urinary tract infections of bacterial origin. The color test is based on the principle of the Griess reaction. Any degree of pinkorange coloration should be interpreted as a positive nitrite test suggestive of ≥105 organisms/ml For In-Vitro Diagnostic