Dill - Happenmit einer Zuckerart und S üßungsmittel Fertigwaren -Spezifikation Drews Geltungsbereich: Betriebslabor, Entwicklung, ProduktionDas Produkt einschließlich der Verpackung entspricht den jeweils gültigen lebensmittelrechtlichen Bestimmungen der Bundesrepublik Deutschland. Das Endprodukt bzw. dessen Zutaten sind nicht mit ionisierenden oder ultravioletten Strahlen behandelt. GMO:
- A |
J |K |
U |V |
Safe handling of organic peroxidesSAFETY AND HANDLING OF ORGANIC PEROXIDES:
Prepared by the
ORGANIC PEROXIDE PRODUCERS SAFETY DIVISION
THE SOCIETY OF THE PLASTICS INDUSTRY, INC.
Publication # AS-109
The Society of the Plastics Industry, Inc., August, 1999
The Organic Peroxide Producers Safety Division of the Society of the Plastics Industry, Inc.
for his original paper “Safe Handling of Organic Peroxides: An Overview,” *
*Plant/Operations Progress, 1989, 8, 185-189 TABLE OF CONTENTS
CONFUSION OVER PROPERTIES
TYPES OF ORGANIC PEROXIDES
RULES FOR SAFE HANDLING
Disposal of Wastes
SAFETY AND HANDLING OF ORGANIC PEROXIDES: A GUIDE
When considering safe handling procedures, organic peroxides have a specific chemical structure which makes them useful but also requires their careful handling and storage. A great deal of mystique and partial or misinformation has surrounded organic peroxides, particularly as it applies to safety. Thus, there was and is a need for a better understanding of organic peroxides.
However, because of the wide range of properties that organic peroxides possess and the number of compositions that have been developed for commercial use or increased safety, completely covering the safe handling practices of all organic peroxide formulations1 is beyond the scope of this Guide. As a result, this Guide will endeavor to provide a basis for understanding the basic nature of organic peroxides as related to their safe use, handling and storage by addressing the Why has there been so much confusion and so many misconceptions about the Why has it taken so long to develop tests to quantify the hazardous properties of organic peroxides and rational codes and regulations for their storage, transport, and safe 1 a technically pure organic peroxide or a mixture with one or more materials, usually diluents.
What are the characteristic properties of organic peroxides which are important in their safe use and handling, and how are they manifest? Based on present knowledge, how are organic peroxides handled safely? CONFUSION OVER PROPERTIES
Organic peroxides are not a neat little family of compounds characterized by a single physical or chemical property. An organic peroxide is, by definition, any organic chemical that contains an oxygen-oxygen (---0---0---) linkage or bond (peroxy group). That potentially includes a very large number of compounds with a wide range of properties. In practice however, manufacturers and users are concerned with commercial organic peroxide formulations, so the number of compounds, while large, is manageable.
There are many commercial uses for organic peroxides. Some are used as the technically pure compound, liquid or solid. Others are diluted as solutions, pastes, solid granules, etc., as the application or safe handling requires. With the wide range of properties possessed by organic peroxides and many physical forms and concentrations, commercial formulations have an extraordinarily large range of safety-related properties. Organic peroxide formulations vary in reactivity hazard from self-extinguishing to the potential for a violent deflagration. The broad range of safety-related properties among organic peroxide formulations was both confusing to the user and a major safety problem because all organic peroxide formulations tended to be grouped together. Thus the need for a classification system.
Given that commercial organic peroxide formulations must be shipped and handled safely, the Bureau of Explosives of the American Association of Railroads started testing
commercial organic peroxide formulations over 50 years ago to determine if such compositions met the Bureau’s (and the Interstate Commerce Commission’s) minimum standards for shipment. Major efforts were made by Factory Mutual  and the Organic Peroxide Producers Safety Division (OPPSD) of The Society of the Plastics Industry (SPI)  to classify organic peroxide formulations by hazard level, but these efforts received only limited U.S. or Worldwide acceptance. Until the adoption of The National Fire Protection Association (NFPA) 43B (currently NFPA 432), Code for the Storage of Organic Peroxide Formulations, there was no officially recognized U.S. code to group the commercial organic peroxides by hazard class.
Hazard Identification and Classification Problems
The identification and rating of the hazardous properties of organic peroxides has been a difficult task. Commercial organic peroxide formulations, while energetic substances, release so much less energy on decomposition than high explosives that most of the tests used for high explosives have little application. Unable to use the tests developed by the vast resources of the world’s defense establishments that focus on propellants and explosives, in the U.S., the burden fell on the relatively limited resources of the Organic Peroxide Producers Safety Division (OPPSD) aided by the Bureau of Explosives, and later, the Bureau of Mines (supported by the Department of Transportation). Internationally, besides manufacturers, Germany (BAM) , the Netherlands (TNO) , and the United Kingdom (Health and Safety Executive)  have been major contributors. Others that have contributed are Japan, France and Sweden. It has been reassuring that, while different countries developed different test procedures, similar hazard classifications were derived for most organic peroxide formulations.
The identification of the hazards, the development of the quantitative test methods, and the comparison of the test results obtained with field experience, led to the formulation of classifications, codes and regulations. An excellent example of this is the adoption by the United Nations of many of the test methods and their use to develop the classification system for organic peroxides in the UN’s Recommendations for the Transport of Dangerous Goods (UN Orange CHARACTERISTIC PROPERTIES
While there are many types of organic peroxides, they all have at least one oxygen- oxygen (-0-0-) bond in their chemical structure (see page 14 for examples). For the organic peroxide to be useful, this bond must be broken, usually by heating to produce free radicals which can initiate polymerization or another desired end result. This decomposition produces heat and by-products. The rate of decomposition is different for each organic peroxide. For those where the rate is rapid at room temperature, this type of organic peroxide is stored and shipped under refrigerated conditions. Other organic peroxides can be stored and shipped safely The oxygen-oxygen linkage or bond (peroxy group) (-0-0-), which characterizes organic peroxides, is a thermally sensitive and energetic bond. It contributes the special properties that organic peroxides, to varying degrees, have in common. These are: • Release of heat on decomposition.
• Formation of free radicals on decomposition • Sensitivity to contamination (selective).
• Formation of gases and mists on decomposition (selective).
The properties listed above are manifested to varying degrees in all organic peroxide 1. Temperature induced decomposition: There is no specific temperature at which
decomposition begins. The rate of decomposition, simplistically stated, is dependent on, or is a function of, the temperature. There is some decomposition occurring even at very low temperatures. The rate of decomposition of organic peroxides increases rapidly as the temperature increases, faster than most chemical reactions increase. As the temperature increases it will reach a temperature at which the rate becomes so rapid that large quantities of heat and reaction products (some often gaseous) are produced. If the heat generated is not dissipated or absorbed, the temperature of the organic peroxide increases, which increases the rate of decomposition. The decomposition may then auto- accelerate and, with very energetic formulations, become uncontrollable.
Confinement during a rapid or runaway decomposition may result in very high pressures and temperatures. Transition to a higher order of decomposition may result.
During thermal decomposition, most organic peroxides to some extent react with their decomposition products (including free radicals). This often increases the rate as the decomposition proceeds. Diluents, including other organic peroxides, may participate as well; some may reduce and others may increase the rate and type of decomposition.
The temperature at which an organic peroxide formulation visibly decomposes when heated rapidly (rapid heat decomposition temperature: RHDT) occurs at a much higher temperature than the self accelerating decomposition temperature (SADT). The SADT is the lowest temperature at which an organic peroxide formulation in a commercial package undergoes self-accelerating decomposition (temperature increase >6 oC over 7 days). With some energetic and low temperature formulations, the final decomposition may be uncontrollable. The SADT and RHDT may be quite different from, and should not be confused with, the ½-life numbers given for organic peroxides in a dilute solution.
Determining the safe handling, storage and shipping temperatures is a significant part of the testing that must be done before an organic peroxide formulation is offered for sale.
2. Increased burning rate: The burning rate is higher for an organic peroxide formulation
than for a similar composition without the peroxy group. This is the result of the energy liberated when the peroxy group decomposes, supplying heat to the burning organic peroxide in addition to the heat flux from the flame.
Burning with acceleration: This is a characteristic property of organic peroxide
formulations that decompose rapidly at a temperature below their boiling points and that are not formulated to absorb the heat of decomposition during burning. When such organic peroxide formulations burn, the temperature of the material increases. As in No.
2 above, when the temperature range is reached at which rapid decomposition occurs, the heat of decomposition, which is liberated internally, increases the temperature of the material, the burning rate and, thus, the heat flux back to the burning surface. As the temperature further increases so does the rate of decomposition and heat release, further Increased flame temperature: If the temperature range at which rapid decomposition
occurs is higher than the boiling point of the organic peroxide, then the decomposition and the major energy release takes place in the flame, increasing the flame temperature.
Contamination initiated (Promoted) decomposition: In addition to thermal
decomposition, organic peroxides can be induced to decompose by contaminates such as: promoters, amines, metal ions, strong acids and bases, strong reducing and oxidizing agents and contact with some metals. Susceptibility to decomposition due to contamination or contact varies greatly among different organic peroxide types and formulations. For example: organic peroxides that are particularly susceptible are those with the -O-O-H group. Decomposition can be by radical and by ionic pathways.
Auto-ignition during decomposition: It is the ease of splitting the peroxy group to give
two free radicals that makes organic peroxides so useful. However, the presence of energetic free radicals during decomposition (particularly in hot gases or mists) can cause auto-ignition to occur at a lower temperature than would otherwise be normal for a similar structure without the peroxy group.
Release of flammable gases and mists during decomposition: Some organic peroxide
formulations release a considerable amount of gases and/or mists particularly when rapid decompositions occur. Not all gases released are flammable. In fact, these gases are rarely oxygen, with carbon dioxide being a common decomposition product. However, when flammable gases or mists are released there is always the potential danger of a fire Oxidizing Properties: While most organic peroxides exhibit weak oxidizing properties
toward reducing agents, contrary to wide-spread belief, most organic peroxide formulations are fuels, not oxidizers. Only one type, the peroxy acids, shows strong oxidizing properties. The oxygen-oxygen bond only rarely decomposes to give free oxygen. It is not surprising that there has been confusion since, at one time, the DOT labels for oxidizers and organic peroxides were the same and the latter still uses a yellow label, although different from that for oxidizers. It should be noted that organic peroxides and strong oxidizers are not compatible.
Properties Related to Structure and Additives (Diluents)
The properties of an individual peroxide depend on the size and structure of the organic groups attached to the oxygens. One of the groups can be hydrogen. The properties are commonly further modified by the use of additives to phlegmatize (desensitize), stabilize or otherwise prepare the organic peroxide for commercial use. Commercial formulations are occasionally mixtures of organic peroxides.
The peroxy group is the main source of commercial utility for organic peroxides.
However, the groups attached at either end of the -0-0- determine the relative thermal stability and chemical activity of the peroxide. Each peroxy group is considered to contain one active oxygen atom. The concept of active oxygen content is useful for comparing the relative concentration of peroxy groups in formulations, which is related to the energy content. In general, energy content increases with active oxygen content and thus, the higher the molecular weight of the organic groups, the lower the energy content and, usually, the lower the hazard.
However, the active oxygen content at which a transition from a simple to a higher order decomposition can occur varies considerably between organic peroxide types (structures) and For example, when benzoyl peroxide (98%) at 6.5% active oxygen is burned, it undergoes transition from a low order to a high order decomposition with slight confinement, while the decomposition rate of cumyl hydroperoxide (85%) at 8.9% active oxygen is relatively unaffected by the confinement of a steel drum.
TYPES OF ORGANIC PEROXIDES
The simplified formula for organic peroxides is R OOR where R is an organic group and R is the same or different organic group or hydrogen.
Common types of commercially available organic peroxides are shown on the following page.
Note that within each type, the exact structure of the various organic groups determines the thermal stability of any particular member. For some types, such as peroxydicarbonates, the nature of the organic groups has little effect on the thermal stability. For other types, like peroxyesters, the organic groups can have a dramatic effect on thermal stability. In some of the types, one or more of the organic groups must be tertiary-alkyl groups in order for the peroxides Common Types
Temperature – Activity Range
2 Expressed as 10 hour half-life temperatures in a dilute solution R and R are generally alkyl groups, often tertiary-alkyl groups. If attached directly to the RULES FOR SAFETY AND HANDLING ORGANIC PEROXIDE FORMULATIONS
Know your product. Read the directions! With so many types of organic peroxide formulations it is absolutely essential that the characteristics and the particular conditions for the safe handling of each formulation are read and understood. The label, product bulletin and material safety data sheet (MSDS) are good places to start. Consult the manufacturer, distributor or supplier for recommendations for safe use and storage.
Know the NFPA 432 hazard class and the properties associated with that class. These standards define safe storage and fire fighting methods. The classification description given in NFPA 432, together with the fire hazard characteristics, are described below. Classes are only for organic peroxide formulations in their original DOT shipping container.
“Class I" describes those formulations which are capable of deflagration, but not detonation. Fire hazard characteristics: Class I formulations present a deflagration hazard through easily initiated, rapid explosive decomposition. Class I includes some formulations that are relatively safe only under closely controlled temperatures. Either excessively high or low temperatures may increase the potential for severe explosive decomposition.
“Class II" describes those formulations that burn very rapidly and that present a severe reactivity hazard. Fire hazard characteristics: Class II formulations present an NFPA fire hazard similar to Class I flammable liquids such as acetone or toluene. The decomposition is not as rapid, violent, or complete as that produced by Class I formulations. As with Class I formulations, this class includes some formulations that are relatively safe when used under controlled temperatures or when diluted.
“Class III" describes those formulations that burn rapidly and that present a moderate reactivity hazard. Fire hazard characteristics: Class III formulations are characterized by rapid burning and high heat liberation, due to decomposition. They present a hazard similar to Class II combustible liquids such as #2 fuel oil.
“Class IV" describes those formulations that burn in the same manner as ordinary combustibles and that present a minimal reactivity hazard. Fire hazard characteristics: Class IV formulations present fire hazards that are easily controlled. Reactivity has little effect on fire “Class V" describes those formulations that burn with less intensity than ordinary combustibles or do not sustain combustion and that present no reactivity hazard. Fire hazard characteristics: Class V formulations do not present severe fire hazards. Those that do burn do so with less intensity than ordinary combustibles.
Whether shipping, handling or storing, these are the most important parameters to The Department of Transportation has greatly assisted safe handling by regulating the shipping temperature, the package size and the degree of confinement from the container.
No single parameter is as important as the control of the temperature. Whether shipping, handling or storing, if the temperature is maintained well below its self-accelerating decomposition temperature (SADT), most hazards are avoided. The SADT can be anywhere from - 10 to + 2000C and depends on the particular organic peroxide formulation and package.
For shipping purposes, the SADT (as previously defined) is the lowest temperature at which self- accelerating decomposition occurs within seven days for a peroxide formulation in its DOT shipping container when held at that temperature. At the SADT, the rate of evolution of heat from decomposition exceeds the rate of heat loss to the surroundings so that the peroxide’s temperature increases with time and the decomposition becomes increasingly more rapid or self- For storage over a longer period of time, the manufacturer’s recommended temperature for storage should be rigorously followed. It should also be noted since decomposition temperatures are time dependent, temperatures higher than the shipping temperature can be tolerated for short periods during handling and use. To repeat, proper temperature control is
important to prevent run-away decompositions, evolution of gases and mists (that may lead to
vapor explosions), auto-ignition or loss of product quality.
The maximum possible transport temperature, also known as “Control Temperature”
(CT), is dependent on the SADT and is determined as follows: CT = SADT minus 15 0C if SADT < 25 0C, 30 0C or 35 0C
CT = SADT minus 10 0C if SADT < 40 0C, 45 0C or 50 0C
Note: There is no CT, if the SADT is higher than 50 0C.
The CT is the temperature up to which the organic peroxide can be safely transported for an extended period. It is also the alarm temperature. The CT is supplemented by an “Emergency Temperature” which is higher than the CT but still well below the SADT. The CT may be exceeded if maintenance is necessary or until alternative cooling (e.g. dry ice or wet ice) is available. However, if the Emergency Temperature is reached, immediate steps must be taken
to remove personnel from the area and, if possible, to cool down and then dispose of the organic peroxides.
Often, the recommended storage temperature is lower than the control temperature, not for safety, but to minimize the unavoidable active oxygen loss due to gradual decomposition. On the other hand, some liquid or paste organic peroxides must not be stored below a certain minimum temperature as turbidity, phase separation, crystal deposits or solidification can occur.
The recommended temperature range of temperature for storage can be found on each organic peroxide package and in the corresponding technical literature.
In general, in addition to the temperature, the rate and type of thermal decomposition for individual organic peroxides will depend, in part, on quantity, heating rate, time and CONTAMINATION CONTROL
Contamination can lead to rapid decomposition and all of the problems associated with lack of temperature control. Susceptibility of organic peroxides to induced decomposition from contamination varies greatly between the types of organic peroxides and the specific contaminants. Nevertheless, contamination has been a major source of accidents from run-away decompositions, particularly during handling and use. Especially sensitive are the ketone peroxides, hydroperoxides, peroxyketals, and some diacyl peroxides. The contaminants most often causing problems have been redox agents such as cobalt salts and other accelerators and promoters, as well as various metal ions and ionizing acids such as high concentrations of sulfuric acid. Strong oxidizing and reducing agents can also cause decompositions.
Examples of decomposition initiated by contamination are: methyl ethyl ketone peroxide (open chain) by cobalt salts, benzoyl peroxide by dimethylaniline and di(t-butylperoxy)– cyclohexane by concentrated sulfuric acid.
To avoid problems from contamination, never return unused organic peroxides to the original container. Use only scrupulously clean equipment and make certain that all materials that the organic peroxide comes in contact with are compatible, especially if equipment such as pumps are used for multiple services. When a diluent is used, the selection of a diluent and its purity must be strictly controlled. Contact your supplier for recommendations. While it is a good practice in any situation where a reactive diluent is employed, a general blending rule is to add the organic peroxide to a resin or monomer, not the reverse. Never add organic peroxides to a hot diluent or process. When reactive materials, such as styrene, are employed as diluents (or solvents), strictly adhere to temperature controls and venting requirements because of potential The effectiveness of diluents, as a phlegmatizer (or desensitizer), is due in part to the reduction in energy level by dilution or energy absorption, and may also act as a mild chain stopper since most decompositions proceed by a chain mechanism.
For contamination problems from absorbents used during spills, see the section on spills.
Once rapid decomposition is initiated, confinement of an organic peroxide formulation may greatly accelerate the rate of its decomposition. With the higher energy classes, transition from a manageable decomposition to a deflagration can occur, which ordinary venting will not control. When it is necessary to confine high-energy organic peroxides by more than the confinement provided by the DOT shipping container, dilution of the peroxide usually is required. See diluents under "Contamination Control" above. The selection of a diluent and its Nevertheless, in many manufacturing operations it is necessary or desirable to use containers, pumping systems and piping to deliver or handle the organic peroxide being used at processing areas or work stations. If the organic peroxide is not diluted and the system provides additional confinement, then the quantities must be kept to the very minimum and sufficient venting provided to prevent pressure build up. Shielding may be required. If this is not done, then the organic peroxide often must be handled as a higher hazard class material.
t-Butyl peroxybenzoate is an example of an organic peroxide for which properties differ markedly between confinement in a polyethylene container and in a steel drum.
Both quantity per container and the total quantity must be controlled in order to minimize the loss from a fire or decomposition. These quantities are determined by the properties of the particular organic peroxide formulation being handled. For shipping, the Department of Transportation regulates the package size and number per outside container. The quantity in storage must be controlled in accordance with the limitations in NFPA 432. During use, the quantity in the process area should be maintained at the lowest practical level. If quantities are not strictly controlled, the potential exists during a fire or decomposition of a transition from a low order to a higher order event. The hazard to surrounding or adjacent structures is also increased as the stored quantity is increased.
Spills can result in a host of problems. Potential hazards involved are: Fire (most non-aqueous peroxide formulations contain flammable solids and/or Decomposition (due to either increased temperature or contamination) Evaporation of a safety diluent (either because the diluent is volatile at ambient temperature, or because the spill involved a hot surface) Increased worker exposure (peroxide formulations, especially hydroperoxides and ketone peroxide, can be strong irritants) Incorrect choice of absorbent material and/or methods Know what action is recommended for each specific formulation that is used. Cleaning up a spilled organic peroxide formulation may not present a serious problem, or considerable time may elapse before a serious problem develops. On the other hand, rapid and proper action may be required; this is normally the best procedure in any case. With flammable liquids and solids the problem is immediate. Beware. Many organic peroxide formulations are difficult to ignite but burn vigorously once ignited. Depending on the peroxide and contaminant, it may take a long time for decomposition to occur, if at all. On the other hand, decomposition may occur within a short time period, so take precautions accordingly. In any case, it is most important to avoid decomposition or a fire.
In many cases, dilution with a compatible inert solid absorbent followed by wetting with water is very effective. Dilution with a compatible high boiling organic liquid prior to absorption is often effective and desirable especially with the more energetic or flammable formulations. Caution: absorbents often have high surface areas which may catalyze decomposition as well as contain catalyzing impurities. Special care must be used when water wet solids are spilled. Avoid drying out by wetting down spilled material immediately.
Use the MSDS provided with the organic peroxide formulation (and manufacturers= technical brochures, if available) to prepare for proper action in the event of a spill. Have personnel protection equipment, fire fighting equipment, absorbents, diluents, clean-up tools (non-sparking), and other emergency supplies available in all areas where organic peroxides are Standard precautions should be taken when handling waste from an organic peroxide spill (or container leakage). In addition, special precautions should be taken to prevent a subsequent decomposition due to contamination or heat. Waste after clean up should be removed from work and storage areas and isolated for further emergency treatment and prompt disposal. Do not store in tightly sealed closed containers. Permit venting of further decomposition products.
DISPOSAL OF WASTES
Disposal of wastes after the clean up of an organic peroxide spill or from container leakage is always a problem. This material should not be reused. Because of the rapid changes in the Federal and State regulations concerning waste disposal, it is beyond the scope of this Guide to cover waste disposal. Consult the MSDS and available manufacturers= literature for information regarding proper disposal. Workers involved in handling, dispensing and spill clean-ups should be reminded of the potential hazards that some formulations may have from decomposition due to contamination or heat.
Fire not only can originate from within the organic peroxides due to decomposition initiated by temperature or contamination, but it may spread to the organic peroxides from adjacent areas. Proper storage and use of mechanical devices can help prevent damage to surrounding areas from burning or decomposing organic peroxides. The recommendations in NFPA 432 should be followed. Keep organic peroxides well away from other combustible materials in their storage area, preferably isolating them by means of firewalls. If possible, store organic peroxides in a separate building at some distance from adjacent buildings. All areas of organic peroxide storage should be equipped with fire control systems, such as automatic Water is usually the agent of choice to fight fire. The effectiveness of water in the control (by sprinklers or hoses) of fires in storage and work areas varies with the individual organic peroxide formulations. It is especially useful for those formulations that are heavier than water. Water is also useful in cooling areas not yet involved in a fire. When using hoses, spray or fog is most effective. For low boiling and low-density formulations, Aqueous Fire Fighting Foam (AFFF) may be more effective than water alone. In some very special cases, dry chemical formulations may be effective but may also be a problem with others. Water can aggravate control of fires or cause decomposition of low temperature organic peroxides due to the warming of the organic peroxide by the water. With low temperature organic peroxides, specialized fire control methods are required. Manual fighting of fires should be undertaken only with lower energy organic peroxides - consult NFPA 432.
ANFPA 432 Storage of Organic Peroxide Formulations,@ 1997, National Fire Protection Association, Battery Park, Quincy, MA 02269.
ARecommendations on the Transport of Dangerous Goods,@ 10th rev.ed. United Nations, “Loss Prevention Bulletin 7-8,” Factory Mutual Engineering Corp., August 1986.
Bulletin 19A-1975, Suggested Relative Hazard Classification of Organic Peroxides, Society of the Plastics Industry, Inc., 1801 K Street, N.W., Suite 600K, Washington, DC Bundersanstalt für Material-prüfung (BAM), Unter den Eichen 87, 1000 Berlin 75, Prins Maurits Laboratorium, Nederlandse Organisatie voor toegepast natuurwetenschappelijk onderzoek (TNO), Postbus 45, 2280 AA Rijswijk, Netherlands.
Health and Safety Executive, Research and Laboratory Services Division, Harpur Hill,
PDE5 Inhibitors for Treatment of Erectile Dysfunction Introduction Three selective phosphodiesterase type-5 (PDE5) inhibitors are licensed for the treatment of erectile dysfunction – sildenafil, tadalafil and vardenafil. They are all included in the joint formulary. These medications have proven efficacy and safety; the major difference between them is that sildenafil a