Skorpionzinc.com.na

SAFETY DATA SHEET
Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II - United Kingdom (UK)
METALLIC ZINC
1: Identification of the substance/mixture and of the company/undertaking
1.1 Product identifier
Product name
Synonyms
: Zinc Metal Sheets; Zinc Metal Shot; Zinc Metal Strips REACH Registration
Chemical Formula

1.2 Relevant identified uses of the substance or mixture and uses advised against

Identified uses
: Alloys (low alloy steels, stainless steel, copper and brass, permanent magnets, electrical resistance alloys); electroplated protective coatings; electroformed coatings; alkaline storage batteries, fuel cell electrodes, catalyst for methanation of fuel gases and hydrogenation of vegetable oils; making of Uses advised against
1.3 Details of the supplier of the safety data sheet
Supplier
Email address of person
responsible for SDS
1.4 Emergency telephone number
National advisory body/Poison Centre
Telephone number : Please contact your national poison centre/advisory body.
Supplier
Telephone number : +264 63 271 2000 / +264 81 146 2610 (Emergency Coordinator)
Hours of operation : Office Hours: 07:00 – 16:30
2: Hazard identification
2.1 Classification of the substance or mixture
Classification according to Regulation (EC) No. 1272/2008 [CLP/GHS] Zinc metal in massive form is not classified as hazardous. Classification according to Directive 67/548/EEC [DSD] The product is not classified as dangerous according to Directive 1999/45/EC and its amendments. See Section 11 for more detailed information on health effects and symptoms. See Section 16 for the full text of the R phrases or H statements declared above. 2.2 Label elements
Signal word
Hazard statements
: No known significant effects or critical hazards Precautionary statements
Prevention
Response
Disposal
2.3 Other hazards
Other hazards which do
: Hazards may be created by change in the physical condition of the metal, e.g. during melting. On result in classification
heating zinc metal above 750oC freshly formed fumes of zinc oxide will be evolved. Zinc oxide fume is associated with the onset of Metal Fume Fever, a reversible illness with flu-like symptoms. If the lead content of the metal is over 1% and the physical state of the metal is altered, and dust or fumes are generated, then the hazard statements are harmful by inhalation and if swallowed. Danger of cumulative effects. Zinc may be taken up and bio-accumulated in invertebrates and other 3: Composition/information on ingredients
Substance/mixture: Mono-constituent substance
Classification
Product/ingredient name
Identifiers
Regulation (EC) No.
67/548/EEC
1272/2008 [CLP]
There are no additional ingredients present which, within the current knowledge of the supplier, are classified and contribute to the classification of the
substance and hence require reporting in this section.
Type
[1] Substance classified with a health or environmental hazard.
Occupational exposure limits, if available, are listed in Section 8. 4: First aid measures
4.1 Description of first aid measures
Eye contact
: Check for and remove any contact lenses. In case of contact, immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical attention if irritation occurs. Inhalation
: If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give Skin Contact
: Wash with soap and water. Cover the irritated skin with an emollient. Get medical attention if irritation Ingestion
: Do NOT induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person. If large quantities of this material are swallowed, call a physician immediately. Loosen tight clothing such as a collar, tie, belt or waistband. Protection of first-aiders
4.2 Most important symptoms and effects, both acute and delayed
Potential acute health effects
Eye contact

: No significant irritation expected other than possible mechanical irritation. Inhalation
: Zinc dust is discomforting to the respiratory tract when inhaled and initially acts as a respiratory irritant. Zinc oxide fumes and vapour produced from high temperature processes can produce ‘metal fume fever’. Symptoms include headache, nausea, chills, muscle aches, fever, coughing, chest tightness and a metallic taste in the mouth. The onset of symptoms may be delayed by up to 24 hours after exposure however normally symptoms present between 3 and 10 hours post exposure and can last for approximately 48 hours. Personnel may be particularly susceptible to metal fume fever after a period of non-exposure. Skin contact
: Material may be mildly discomforting to the skin. Zinc may irritate the skin and produce redness and Ingestion
: Not normally a hazard due to the physical form of the product. Material is discomforting to the digestive tract and may cause nausea, vomiting, headache, abdominal discomfort and diarrhea. Convulsion, collapse and unconsciousness and death may occur in severe cases. Over-exposure signs/symptoms
Eye contact
Inhalation
Skin contact
Ingestion
4.3 Indication of any immediate medical attention and special treatment needed
Notes to physician
: Treat symptomatically. Contact poison treatment specialist immediately if large quantities have Specific treatments
5: Firefighting measures
5.1 Extinguishing media
Suitable extinguishing
: Use an extinguishing agent suitable for the surrounding fire. Dry sand or other inert material. Use Unsuitable extinguishing : Water, foam or CO2 extinguishers
5.2 Special hazards arising from the substance or mixture
Hazards from the
substance or mixture
Hazardous combustion
: Zinc + NaOH causes ignition. Oxidation of zinc by potassium proceeds with incandescence. products
Residues from zinc dust /acetic acid reduction operations may ignite after long delay if discarded into waste bins with paper. Incandescent reaction when Zinc and Arsenic or Tellurium, or Selenium are combined. When hydrazine mononitrate is heated in contact with zinc, a flaming decomposition occurs at temperatures a little above its melting point. Contact with acids and alkali hydroxides (sodium hydroxide, postasium hydroxide, calcium hydroxide, etc.) results in evolution of hydrogen with sufficient heat of reaction to ignite the hydrogen gas. Zinc foil ignites if traces of moisture are present. It is water reactive and produces flammable gases on contact with water. Damp zinc metal dust may heat spontaneously and ignite on exposure to air.
5.3 Advice for fire fighters

Special precautions
Special protective
: Clothing for fire-fighters (including helmets, protective boots and gloves) conforming to European equipment
standard EN 469 will provide a basic level of protection for chemical incidents. 6: Accidental release measures
6.1 Personal precautions, protective equipment and emergency procedures
For non-emergency
: Provide adequate ventilation. Wear appropriate respirator when ventilation is inadequate. Put on personnel
appropriate personal protective equipment. For emergency responders : See Section 8 for information on appropriate personal protective equipment. Follow good industrial

6.2 Environmental precautions
: Avoid dispersal of spilt material and runoff and contact with soil, waterways, drains and sewers. Inform the relevant authorities if the product has caused environmental pollution (sewers, waterways, soil or air).
6.3 Methods and materials for containment and cleaning up
: Move containers from spill area. Vacuum or sweep up material and place in a designated, labeled waste container. Dispose of via a licensed waste disposal contractor. Do not overheat molten zinc. Extracted air containing metallic or metallic oxides should be cleaned before discharge. If product is still hot after casting, cordon off area and allow cooling. If molten product spills, prevent spreading with sand. Solid material should be picked up by shovel or by hand using leather gloves if necessary. Ensure all chips or small particles are picked up and prevented from entering
6.4 Reference to other
: See Section 1 for emergency contact information. sections
See Section 8 for information on appropriate personal protective equipment. See Section 13 for additional waste treatment information.
7: Handling and storage
7.1 Precautions for safe handling
Protective measures
: Put on appropriate personal protective equipment (see Section 8). Persons with a history of skin sensitization problems should not be employed in any process in which this product is used. Keep away from heat. Keep away from sources of ignition. Ground all equipment containing material. Do not breathe dust. Do not get in eyes. Do not ingest. Use mechanical lifting devices and tongs where Advice on general
: Eating, drinking and smoking should be prohibited in areas where this material is handled, stored occupational hygiene
and processed. Workers should wash hands and face before eating, drinking and smoking. See also Section 8 for additional information on hygiene measures. 7.2 Conditions for safe storage, : Use appropriate containment to avoid environmental contamination. Keep away from incompatibles
including any incompatibilities
such as oxidizing agents, acids, alkalis and moisture. Store in a dry covered area. Cordon off stored 7.3 Specific end use(s)
Recommendations
8: Exposure controls/personal protection
The information in this section contains generic advice and guidance. The list of Identified Uses in Section 1 should be consulted for any available use-specific information provided in the Exposure Scenario(s). 8.1 Control parameters
Occupational exposure limits
Product/ingredient name
Exposure limit values
Engineering Controls
: Use process enclosures, local exhaust ventilation, or other engineering controls to keep airborne levels below recommended exposure limits. If user operations generate dust, fume or mist, use ventilation to keep exposure to airborne contaminants below the exposure limit. Personal Protection
: Safety glasses. Approved protective clothing (e.g. overalls and relevant footwear). Dust respirator. Be sure to use an approved/certified respirator or equivalent. Leather gloves.
9: Physical and chemical properties
Physical state and appearance
Odor Threshold
Molecular Weight
pH (1% soln/water)
Boiling Point
Melting Point
Flash point
: Not flammable. Very fine metal dusts may burn under ideal combustion Vapor Pressure
Vapor Density
Water/Oil Dist. Coeff.
Ionicity (in Water)
Dispersion Properties
Solubility
: Insoluble in water, methanol, diethyl ether, n-octanol, acetone. Soluble in acids and alkalis. Explosive Properties
10: Stability and reactivity
Reactivity
: No specific test data related to reactivity available for this product or its ingredients. Chemical stability
Possibility of hazardous
: Under normal conditions of storage and use, hazardous reactions will not occur. reactions Conditions of instability
: Excess heat, incompatible materials, moisture. Incompatible materials
: Strong acids, strong alkalis, strong oxidizers. Reaction with acids & strong alkalis may produce potentially explosive hydrogen gas. The product may react violently with water to emit flammable but Hazardous
: Under normal conditions of storage and use, hazardous decomposition products decomposition products
should not be produced. Heating produces zinc oxide and small quantities of other metal oxides such as lead and cadmium. Abrasion, handling or transport of material may generate inhalable or 11: Toxicological information
11.1 Information on toxicological effects
Toxicokinetics
Potential acute health effects
Inhalation
: Zinc dust is discomforting to the respiratory tract when inhaled and initially acts as respiratory irritant. Zinc oxide fumes and vapour produced from high temperature processes can produce ‘metal fume fever’. Symptoms include headache, nausea, chills, muscle aches, fever, coughing, chest tightness and a metallic taste in the mouth. The onset of symptoms may be delayed by up to 24 hours after exposure however normally symptoms present between 3 and 10 hours post exposure and can last for approximately 48 hours. Personnel may be particularly susceptible to metal fume fever after a Ingestion
: Not normally a hazard due to the physical form of the product. Material is discomforting to the digestive tract and may cause nausea, vomiting, headache, abdominal discomfort and diarrhea. Convulsion, collapse and unconsciousness and death may occur in severe cases. Skin contact
: Material may be mildly discomforting to the skin. Zinc may irritate the skin and produce redness and Eye contact
: No significant irritation expected other than possible mechanical irritation. Potential chronic health Potential chronic health
12: Ecological information
Ecotoxicity
Products of Biodegradation
: Possibly hazardous short term degradation products are not likely. However, long term degradation Toxicity of the Products of
Biodegradation
Special Remarks on the Products : Not available
of Biodegradation
13: Disposal considerations
Waste Disposal
Waste must be disposed of in accordance with legislation.
14: Transport information
International transport regulations ADR/ADNR/IMDG/IATA : Not regulated.
15: Regulatory information
15.1 Safety, health and environmental regulations/legislation specific for the substance or mixture EU Regulation (EC) No.
1907/2006 (REACH)
Annex XIV - List of substances subject to authorisation
Substances of very high concern
Other EU regulations
Europe inventory
16: Other Information
Indicates information that has changed from previously issued version.
Abbreviations and acronyms : ATE = Acute Toxicity Estimate
CLP = Classification, Labelling and Packaging Regulation [Regulation (EC) EUH statement = CLP-specific Hazard statement Procedure used to derive the classification according to Regulation (EC) No. 1272/2008 [CLP/GHS]
Classification
Justification
Zinc metal in massive form is not classified as hazardous To the best of our knowledge, the information contained herein is accurate. However, neither the above-named supplier, nor any of its subsidiaries, assumes any liability whatsoever for the accuracy or completeness of the information contained herein. Final determination of suitability of any material is the sole responsibility of the user. All materials may present unknown hazards and should be used with caution. Although certain hazards are described herein, we cannot guarantee that these are the only hazards that exist. All information in this document shall be considered valid at the date of issuance only.

Source: http://www.skorpionzinc.com.na/pdf/Material-Safety-Data-Sheet-MSDS.pdf

mobilevetsurgeon.com2

Mobile Veterinary Surgeon Dr. Paul Newman Disc Disease Treatment Recommendations, Prognosis, and Recurrence Lets breakdown our back patients into clinical presentations with my recommendations based upon 30 years of doing over a 1000 laminectomies with over 93% good to excellent outcome in patients with deep pain perception. Please keep in mind recent studies that show if a patien

davidlarios.es

Para la mayoría de sus compañeros, no fue una sorpresa encontrarse aquella mañana con que Panizo no estaba en la formación. Un día u otro tenía que ocurrir. Muchos se alegraron de perderlo de vista. Otros se sintieron defraudados. Se les arruinaba, en parte, la sucesión de burlas y novatadas. Se marchaba el tipo raro; blanco Cuartel Militar de Tres Cantos. 12 de agosto de 2002. José

Copyright © 2010-2014 Medical Articles