Toscanovernici.it

J COLORS S.p.A.
Revision nr.4 Dated 03/10/2008Printed on 02/05/2010 Morgan's Wood Color Antitarlo
Safety Data Sheet
1. Identification of the substance / preparation and the Company
1.1 Identification of the substance or preparation
1.2 Use of the substance / preparation
1.3 Company identification
e-mail address of the competent personresponsible for the Safety Data Sheet Laboratorio J Colors S.p.A +39 02 93754222/243 1.4 Emergency telephone
Centro Antiveleni Milano Niguarda +39 02 66101029 2. Hazards Identification
This product is dangerous under 67/548/EEC and 1999/45/EC directives and subsequent amendments. Therefore, this product requiresa safety data sheet according to the Regulation (EC) 1907/2006 and subsequent amendments. Further information on health and/orenvironmental hazards can be found in sections 11 and 12 of this sheet.
VERY TOXIC TO AQUATIC ORGANISMS, MAY CAUSE LONG-TERM ADVERSE EFFECTS IN THE AQUATIC ENVIRONMENT.
HARMFUL: MAY CAUSE LUNG DAMAGE IF SWALLOWED.
REPEATED EXPOSURE MAY CAUSE SKIN DRYNESS OR CRACKING.
This product contains sensitizing substance/s and may cause allergic reactions.
3. Composition / Information on ingredients
ISOPARAFFINS 180°C/210°C
PERMETHRIN
The complete text of -R- phrases is specified in section 16.
J COLORS S.p.A.
Revision nr.4 Dated 03/10/2008Printed on 02/05/2010 Morgan's Wood Color Antitarlo
4. First aid measures
EYES: Irrigate copiously with clean, fresh water for at least 15 minutes. Seek medical advice.
SKIN: Wash immediately with plenty of water. Remove contaminated clothing. If irritation persists, seek medical attention. Washcontaminated clothing before using them again.
INHALATION: Remove to open air. If breathing is irregular, seek medical advice.
INGESTION: Obtain immediate medical attention. Induce vomiting only if indicated by the doctor. Never give anything by mouth to anunconscious person.
5. Fire-fighting measures
GENERAL INFORMATION Use jets of water to cool the containers to prevent product decomposition and the development of substances potentially hazardous forhealth. Always wear full fire prevention gear. Collect extinguishing water to prevent it from draining into the sewer system. Dispose ofcontaminated water used for extinction and the remains of the fire according to applicable regulations. SUITABLE EXTINGUISHING MEDIAThe extinction equipment should be of the conventional kind: carbon dioxide, foam, powder and nebulised water. EXTINGUISHING MEDIA WHICH SHALL NOT BE USED FOR SAFETY REASONSNone in particular.
HAZARDS CAUSED BY EXPOSURE IN THE EVENT OF FIREDo not breathe combustion products (carbon oxide, toxic pyrolysis products, etc). SPECIAL PROTECTIVE EQUIPMENT FOR FIRE-FIGHTERSHardhat with visor, fireproof clothing (fireproof jacket and trousers with straps around arms, legs and waist), work gloves (fireproof, cutproof and dielectric), a depressurised mask with facemask covering the whole of the operator’s face or a self-respirator (self-protector) inthe event of large quantities of foam.
6. Accidental release measures
PERSONAL PRECAUTIONS Eliminate all sources of ignition (cigarettes, flames, sparks, etc.) from the leakage site. If there are no contraindications, spray solidproducts with water to prevent the formation of dust. Use breathing equipment if fumes or powders are released into the air. Block theleakage if there is no hazard. Do not handle damaged containers or the leaked product before donning appropriate protective gear. Forinformation on risks for the environmental and health, respiratory tract protection, ventilation and personal protection equipment, see theother sections of this sheet. ENVIRONMENTAL PRECAUTIONS The product must not penetrate the sewers, surface water, ground water and neighbouring areas. METHODS FOR CLEANING UPUse inert absorbent material (sand, vermiculite, diatomeous earth, Kieselguhr, etc.) to soak up leaked product. Collect the majority of theremaining material and deposit it in containers for disposal. If there are no contraindications, use jets of water to eliminate productresidues. Make sure the leakage site is well aired. Contaminated material should be disposed of in compliance with the provisions setforth in point 13.
7. Handling and storage
Store in a well ventilated place, keeping the containers closed when not used. Do not smoke while handling. Keep far away from sourcesof heat, bright flames and sparks and other sources of ignition.
8. Exposure control / personal protection.
8.1 Exposure limit values
8.2 Exposure controls
In order to minimize exposure as far as possible, it is strongly recommended to use adequate individual protective measures, such as:masks suitable for the product, goggles, gloves and overall. Do not eat, drink or smoke while handling it. Wash hands accurately withsoap and water before meals and at the end of the work shift.
J COLORS S.p.A.
Revision nr.4 Dated 03/10/2008Printed on 02/05/2010 Morgan's Wood Color Antitarlo
9. Physical and chemical properties
10. Stability and reactivity
The product is stable in normal conditions of use and storage. In the event of thermal decomposition or fire, vapours potentiallydangerous to health may be released.
11. Toxicological information
The introduction of even small quantities of this liquid into the respiratory system in case of ingestion or vomit may causebronchopneumonia and pulmonary edema.
This product may have a degreasing action on the skin, producing dryness and chapped skin after repeated exposure.
12. Ecological information
This product is dangerous for the environment and highly toxic for aquatic organisms. In the long term, it may even have negative effectson aquatic environment.
ISOPARAFFINS 180°C/210°CLC50 (96h) 100 mg/l PERMETHRINLC50 (96h) 0,001 mg/l Oncorhynchus clarkii stomiasEC50 (48h) 0,0003 mg/l Daphnia magnaIC50 (72h) 1,6 mg/l Anabaena inaequalis 13. Disposal consideration
Consider the possibility of burning the product in a suitable incenerator.
Acid or basic products must always be neutralized before undergoing any treatment, including biological treatment whenever feasible. Ifthe waste is solid, it can be disposed of in a landfill.
14. Transport information
These goods must be transported by vehicles authorized to the carriage of dangerous goods according to the provisions set out in thecurrent edition of the Code of International Carriage of Dangerous Goods by Road (ADR) and in all the applicable national regulations.
These goods must be packed in their original packagings or in packagings made of materials resistant to their content and not reactingdangerously with it. People loading and unloading dangerous goods must be trained on all the risks deriving from these substances andon all actions that must be taken in case of emergency situations.
Road and rail transport:
ADR/RID Class:
Carriage by sea (shipping):
IMO Class:
J COLORS S.p.A.
Revision nr.4 Dated 03/10/2008Printed on 02/05/2010 Morgan's Wood Color Antitarlo
Transport by air:
IATA:
15. Regulatory information
VERY TOXIC TO AQUATIC ORGANISMS, MAY CAUSE LONG-TERM ADVERSE EFFECTS IN THE AQUATIC ENVIRONMENT.
HARMFUL: MAY CAUSE LUNG DAMAGE IF SWALLOWED.
REPEATED EXPOSURE MAY CAUSE SKIN DRYNESS OR CRACKING.
KEEP AWAY FROM FOOD, DRINK AND ANIMAL FEEDINGSTUFFS.
AVOID RELEASE TO THE ENVIRONMENT. REFER TO SPECIAL INSTRUCTIONS/SAFETY DATA SHEETS.
IF SWALLOWED, DO NOT INDUCE VOMITING: SEEK MEDICAL ADVICE IMMEDIATELY AND SHOW THIS CONTAINER OR LABEL.
Contains:ISOPARAFFINS 180°C/210°CContains:PERMETHRINMay cause allergic reactions.
Danger labelling under directives 67/548/EEC and 1999/45/EC and following amendments and adjustments.
Workers exposed to this chemical agent must not undergo health checks, provided that available risk-assessment data prove that therisks related to the workers' health and safety are modest and that the 98/24/EC directive is respected.
16. Other information
Text of -R- phrases quoted in section 3 of the sheet.
HARMFUL: MAY CAUSE LUNG DAMAGE IF SWALLOWED.
REPEATED EXPOSURE MAY CAUSE SKIN DRYNESS OR CRACKING.
HARMFUL BY INHALATION AND IF SWALLOWED.
MAY CAUSE SENSITIZATION BY SKIN CONTACT.
VERY TOXIC TO AQUATIC ORGANISMS, MAY CAUSE LONG-TERM ADVERSE EFFECTS IN THE AQUATIC ENVIRONMENT.
GENERAL BIBLIOGRAPHY1. Directive 1999/45/EC and following amendments;2. Directive 67/548/EEC and following amendments and adjustments (technical adjustment XXIX);3. Regulation (EC) 1272/2008 (CLP) of the European Parliament;4. Regulation (EC) 1907/2006 (REACH) of the European Parliament;5. The Merck Index. - 10th Edition;6. Handling Chemical Safety;7. Niosh - Registry of Toxic Effects of Chemical Substances;8. INRS - Fiche Toxicologique (toxicological sheet);9. Patty - Industrial Hygiene and Toxicology;10. N.I. Sax - Dangerous properties of Industrial Materials-7, 1989 Edition; Note for users:The information contained in the present sheet are based on our own knowledge on the date of the last version. Users must verify thesuitability and thoroughness of provided information according to each specific use of the product .
This document must not be regarded as a guarantee on any specific product property.
The use of this product is not subject to our direct control; therefore, users must, under their own responsibility, comply with the currenthealth and safety laws and regulations. The producer is relieved from any liability arising from improper uses.
Changes to previous reviewThe following sections were modified: 12/14

Source: http://www.toscanovernici.it/en/schede_sic/41562.pdf